149-30-4
Content ≥97.0%
Copper corrosion inhibition, Metalworking fluids, Rubber accelerator
Product category
Plastic & Rubber Additives
Performance additives for polymer processing, stabilization and selected plastic and rubber applications.
67 listed products
Browse products in this category
Name
CAS No.
Content / Grade
Function & Usage
RFQ
919-30-2
Industrial / coupling-agent grade; purity ≥98.0%
Promote Adhesion & Silane Coupling — Adhesion promotion, Mineral-filled polymers, Coatings and sealants
2530-85-0
Industrial / coupling-agent grade; purity ≥98.0%
Promote Adhesion & Silane Coupling — Acrylic coatings, Filled polymers, Adhesives
6683-19-8
Polymer-additive grade; assay ≥98.0%
Stabilize Polymers Against Oxidation — Polyolefin stabilization, Engineering plastics, Elastomers
31570-04-4
Polymer-additive grade; assay ≥99.0%
Stabilize Polymers Against Oxidation — Polymer processing stabilization, Polyolefins, Engineering plastics
111-46-6
High-purity / industrial grade; purity commonly ≥99.0% or ≥99.5%; water, acidity, color and glycol profile by grade
Provide Solvency, Carrying & Spreading · Treat Refinery & Gas Streams — Selected natural-gas dehydration and hydrate-control systems, Unsaturated polyester, polyurethane and plasticizer production, High-boiling solvent and heat-transfer formulations
70624-18-9
Polymer-additive grade; assay ≥99.0%
Protect Against UV & Light Degradation — Polyolefin films and fibers, Thick-section plastics, Outdoor polymer products
1533-45-5
Polymer-additive grade; purity ≥98.0%
Brighten Plastics & Fibers — Polyester and plastics brightening, Engineering plastics, Synthetic fibers
63148-62-9 (silicone polymer; finished emulsion is a mixture)
PDMS or amino-silicone emulsion grades; commonly 30%, 35% or 60% active; ionic character, viscosity and particle size by grade
Condition Hair & Reduce Static · Repel Water & Hydrophobize Surfaces · Add Antistatic & Softening Performance — Release and lubrication for rubber, plastics and molds, Textile softening and hand-feel modification, Polishes and surface-care formulations
141-33-3
Mining grade; xanthate purity commonly ≥85% or ≥90%; free alkali ≤0.2% and moisture / volatiles ≤4.0% for selected 90% grades
Select Mineral Flotation Collectors — Copper, lead, zinc and other non-ferrous sulfide-ore flotation, Chalcopyrite, sphalerite and pyrite recovery, Rubber vulcanization-accelerator evaluation subject to grade
112-27-6
Natural-gas dehydration / industrial grade; purity commonly ≥99.0% or ≥99.5%; water, acidity, aldehydes and color by grade
Provide Solvency, Carrying & Spreading · Treat Refinery & Gas Streams — Natural-gas dehydration in glycol contactor systems, Water and hydrate control in gas processing, High-boiling solvent, plasticizer and heat-transfer formulations
1843-05-6
98%
Protect Against UV & Light Degradation — Plastics stabilization, Coatings, Adhesives
2768-02-7
Industrial / coupling-agent grade; purity ≥98.0%
Promote Adhesion & Silane Coupling — Moisture-cure polymer systems, Crosslinking, Adhesion promotion
15875-13-5
97%
Catalyze Polyurethane Foams & Elastomers — Rigid polyurethane foam catalysis, Polyisocyanurate foam systems, Insulation panel production
31506-43-1
70%
Catalyze Polyurethane Foams & Elastomers — Low-emission polyurethane catalysis, Flexible and molded foam production, Coatings and elastomer curing
35948-25-5
Reactive halogen-free flame-retardant grade; assay ≥99.0% typical
Encapsulate, Pot & Electrically Insulate · Build Laminates & Protect Copper · Add Halogen-Free Flame-Retardant Performance — Halogen-free epoxy and laminate systems, Copper-clad laminates, Electronic encapsulation resins
67-64-1
Industrial, reagent and electronic grades; assay ≥99.5%, ≥99.8% or ≥99.9%; water and nonvolatile residue by grade
Provide Solvency, Carrying & Spreading — Precision and electronic cleaning, Coatings, inks and resin processing, Polymer and composite processing
3033-62-3
98%
Catalyze Polyurethane Foams & Elastomers — Polyurethane flexible-foam blowing catalysis, Molded foam production, High-efficiency urethane catalysis
128-37-0
Food / feed / industrial grade; assay ≥99.0%
Protect Against Oxidation · Protect Feed & Support Shelf Life · Improve Feed Flow, Binding & Pellet Quality — Fats and oils stabilization, Feed antioxidant systems, Polymer and rubber stabilization
92704-41-1
Coating grade; calcined kaolin with brightness, particle-size distribution, oil absorption and residue controlled by grade
Improve Mortar Workability & Set Control · Formulate Architectural & Decorative Paints · Build Industrial & Protective Coatings — Architectural paints, Opacity extension and dry-film reinforcement, Primers and industrial coatings
19372-44-2
99%
PVC heat stabilization, Catalyst and crosslinking systems, Coatings and polymer processing
1592-23-0
Food / feed grade; specification by quotation
Prevent Caking & Improve Powder Flow · Bind, Lubricate & Support Dosage Forms · Acidify Feed & Carry Nutrients — Powder flow and anticaking, Tablet and powder processing, Polymer lubricant and acid scavenger
147-14-8
C.I. Pigment Blue 15:1 or 15:3; standard, high-strength, easy-dispersing and solvent-resistant grades
Formulate Architectural & Decorative Paints · Build Industrial & Protective Coatings · Control Paint Opacity, Color & Extender Balance — Architectural and industrial paints, Automotive and protective coatings, Printing inks
108-93-0
Industrial and high-purity grades; assay ≥99.0%, ≥99.5% or ≥99.8%; water, color and cyclohexanone limits by grade
Provide Solvency, Carrying & Spreading · Build Agrochemical Intermediates — Adipic-acid and nylon-intermediate manufacturing, Plasticizer, coating and resin intermediates, Pharmaceutical and agrochemical synthesis
108-94-1
Industrial, reagent and high-purity grades; assay ≥99.5% or ≥99.8%; water, color and residue by grade
Provide Solvency, Carrying & Spreading · Build Industrial & Protective Coatings — Nylon and specialty-intermediate manufacturing, Coatings, inks and adhesive solvent systems, Photoresist and electronic-process formulations by validated grade
541-02-6
Cosmetic and industrial grades; assay ≥99.0% or ≥99.5%; D4/D6, water and nonvolatile residue limits by grade
Soothe, Moisturize & Improve Skin Feel · Provide Solvency, Carrying & Spreading — Volatile carrier for skin and hair formulations, Dry-feel and spreadability enhancement, Silicone polymer and elastomer processing
120-46-7
99%
PVC heat stabilization, Calcium-zinc stabilizer systems, Polymer processing
1704-62-7
95%
Catalyze Polyurethane Foams & Elastomers — Polyurethane foam catalysis, Coatings and elastomer catalysis, Delayed or balanced cure systems
540-97-6
Industrial and cosmetic-processing grades; assay ≥99.0% or ≥99.5%; D4/D5, water and nonvolatile residue limits by grade
Silicone polymer and resin manufacturing, Volatile-carrier and formulation processing, Silicone elastomer and fluid intermediates
471-34-1
Coating grade; CaCO₃ typically ≥97% or ≥98%; 325-2500 mesh; uncoated or stearate-treated grades
Control Rheology & Water Retention · Formulate Architectural & Decorative Paints · Control Paint Opacity, Color & Extender Balance — Architectural paints and primers, Wall putty and textured coatings, Adhesives and sealants
10043-11-5
Thermal-management filler grade; purity ≥98.0% or ≥99.0%; particle-size distribution by grade
Encapsulate, Pot & Electrically Insulate · Conduct Heat While Maintaining Electrical Insulation — Thermal interface materials, Electronic potting and overmolding, Thermally conductive adhesives
85-42-7
Electrical encapsulation / industrial grade; specification by quotation; electronic use requires grade-specific impurity data and application validation
Repel Water & Hydrophobize Surfaces · Encapsulate, Pot & Electrically Insulate · Cure & Accelerate Electronic Epoxy Systems — Epoxy coatings and casting compounds, Electrical impregnation and encapsulation, Electronic and integrated-circuit packaging
90640-32-7 (hydrogenated tallow amine mixture) / 61788-45-2 (tallow amine mixture)
98%
Select Mineral Flotation Collectors — Mineral flotation, Fertilizer anticaking, Polymer antistatic systems
68611-44-9
Surface-treated fumed silica; BET surface area typically 90-300 m²/g; moisture and carbon content by grade
Repel Water & Hydrophobize Surfaces · Control Rheology & Water Retention · Control Paint Rheology, Sag & Settling — Rheology and thixotropy in solvent-borne coatings, Anti-settling and anti-sag control, Adhesives, sealants and composites
25068-38-6
Standard liquid epoxy resin; epoxy equivalent weight typically 184-190 g/eq; viscosity approximately 11-15 Pa·s at 25°C
Encapsulate, Pot & Electrically Insulate · Build Industrial & Protective Coatings · Select Paint Binders & Film-Forming Aids — Industrial and marine protective coatings, Floor coatings, Adhesives and composites
108-31-6
Industrial grade; specification by quotation
Build Agrochemical Intermediates — Unsaturated polyester and alkyd resins, Coatings, inks and adhesive intermediates, Paper-sizing and polymer modification
25134-21-8
Electrical / high-temperature epoxy grade; purity ≥95.0% typical; anhydride value and viscosity by grade
Encapsulate, Pot & Electrically Insulate · Cure & Accelerate Electronic Epoxy Systems — High-temperature epoxy casting, Electrical insulation and potting, Encapsulation resins
19438-60-9
Electrical encapsulation / industrial grade; specification by quotation; electronic use requires grade-specific impurity data and application validation
Repel Water & Hydrophobize Surfaces · Encapsulate, Pot & Electrically Insulate · Cure & Accelerate Electronic Epoxy Systems — Low-viscosity epoxy curing systems, Electrical impregnation and casting, Semiconductor and electronic encapsulation
11070-44-3
Electrical encapsulation / industrial grade; purity ≥95.0% or ≥98.0% typical; viscosity and anhydride value by grade
Encapsulate, Pot & Electrically Insulate · Cure & Accelerate Electronic Epoxy Systems — Electrical potting and casting, Epoxy encapsulation, Insulation varnish and composites
9002-88-4
Micronized PE wax; D50 typically 5-20 μm; melting point approximately 100-130°C; oxidized and non-oxidized grades
Build Industrial & Protective Coatings · Manage Defoaming, Leveling & Surface Quality — Scratch and abrasion resistance, Slip, matting and anti-blocking, Powder and industrial coatings
872-50-4
Industrial, electronic and battery grades; assay ≥99.5% or ≥99.9%; water, amines, metals, particles and color by grade
Provide Solvency, Carrying & Spreading — Lithium-ion battery electrode-slurry processing, Photoresist, semiconductor and electronic cleaning, Engineering-polymer processing
2212-32-0
95%
Catalyze Polyurethane Foams & Elastomers — Polyurethane foam catalysis, Polyurethane elastomer and coating catalysis, Balanced gel and blowing control
98-94-2
98%
Catalyze Polyurethane Foams & Elastomers — Rigid polyurethane foam catalysis, Insulation foam production, Polyurethane resin processing
556-67-2
Silicone-intermediate / industrial grade; assay ≥99.0% or ≥99.5%; water and D3/D5 cyclic-siloxane limits by grade
Silicone polymer and elastomer manufacturing, Silicone resin and fluid intermediates, Specialty formulation carrier subject to destination-market restrictions
3855-32-1
95%
Catalyze Polyurethane Foams & Elastomers — Polyurethane foam catalysis, Rigid and flexible foam processing, Balanced blowing and gel catalysis
1328-53-6
C.I. Pigment Green 7; standard, high-strength, easy-dispersing and weather-resistant grades
Protect Against UV & Light Degradation · Formulate Architectural & Decorative Paints · Build Industrial & Protective Coatings — Architectural and industrial paints, Automotive and protective coatings, Printing inks
7727-43-7
Coating grade; BaSO₄ typically ≥98%; D50 approximately 0.4-10 μm; standard and surface-treated grades
Build Industrial & Protective Coatings · Control Paint Opacity, Color & Extender Balance — Industrial and powder coatings, Automotive primers and topcoats, High-solids and corrosion-resistant coatings
7631-86-9
Food / feed grade; precipitated or fumed grades; SiO₂ ≥99% on ignited basis
Prevent Caking & Improve Powder Flow · Bind, Lubricate & Support Dosage Forms · Acidify Feed & Carry Nutrients — Powder anticaking and flow aid, Food and nutraceutical premixes, Pharmaceutical glidant
Mixture; no single CAS
100% solid powder or flakes; or 50–80% resin solution in a declared solvent; MQ, T, Q and hybrid structure by grade
Repel Water & Hydrophobize Surfaces · Encapsulate, Pot & Electrically Insulate · Build Industrial & Protective Coatings — Heat-resistant and weatherable coatings, Electrical-insulation and encapsulation systems, Release, non-stick and water-repellent surfaces
301-10-0
97%
Catalyze Polyurethane Foams & Elastomers — Polyurethane catalysis, Silicone curing catalysis, Coatings and elastomer processing
58446-52-9
99% / 75%
PVC heat stabilization, Calcium-zinc stabilizer systems, Polymer processing
124-30-1
98%
Select Mineral Flotation Collectors — Fertilizer anticaking, Mineral flotation, Corrosion-inhibitor synthesis
1317-61-9
Pigment grade; Fe₃O₄ typically ≥95%; standard, micronized and low-dust grades
Improve Mortar Workability & Set Control · Formulate Architectural & Decorative Paints · Build Industrial & Protective Coatings — Architectural and industrial paints, Primers and protective coatings, Colored concrete and roofing materials
1309-37-1
Pigment grade; Fe₂O₃ typically ≥95%; standard, micronized, easy-dispersing and low-dust grades
Improve Mortar Workability & Set Control · Formulate Architectural & Decorative Paints · Build Industrial & Protective Coatings — Architectural and industrial paints, Primers and protective coatings, Colored concrete and dry-mix materials
51274-00-1
Pigment grade; iron oxide hydroxide typically ≥86%; standard, micronized and low-dust grades
Improve Mortar Workability & Set Control · Formulate Architectural & Decorative Paints · Control Paint Opacity, Color & Extender Balance — Architectural and industrial paints, Decorative and construction coatings, Colored concrete and dry-mix materials
14807-96-6
Coating grade; 325-3000 mesh; platy particle, brightness, oil absorption, moisture and asbestos-free documentation by grade
Control Rheology & Water Retention · Formulate Architectural & Decorative Paints · Control Paint Opacity, Color & Extender Balance — Architectural and industrial paints, Primer sanding and barrier performance, Anti-settling and rheology support
109-99-9
Industrial, reagent, polymerization and electronic grades; assay ≥99.5% or ≥99.9%; stabilized or inhibitor-free / anhydrous options with water and peroxide limits by grade
Provide Solvency, Carrying & Spreading — Pharmaceutical and fine-chemical synthesis, Polymerization and resin processing, Coatings, adhesives and specialty formulations
85-43-8
Industrial grade; specification by quotation
Provide Solvency, Carrying & Spreading · Build Agrochemical Intermediates — Epoxy-resin curing systems, Unsaturated polyester resins, Solvent-free coatings and adhesives
108-88-3
Industrial, nitration, reagent and high-purity grades; assay ≥99.5%, ≥99.8% or ≥99.9%; water, benzene, sulfur and residue by grade
Provide Solvency, Carrying & Spreading · Build Industrial & Protective Coatings — Coatings, inks and adhesive solvent systems, Polyurethane, resin and rubber processing, Pharmaceutical and fine-chemical synthesis
126-71-6
99%
Provide Solvency, Carrying & Spreading — Flame-retardant and plasticizer formulations, Defoaming and process aids, Solvent extraction
126-73-8
99%
Provide Solvency, Carrying & Spreading — Flame-retardant and plasticizer formulations, Solvent extraction, Metal recovery
78-40-0
99.5%
Catalyze Polyurethane Foams & Elastomers · Provide Solvency, Carrying & Spreading — Polyurethane and resin flame retardancy, Plasticizer and solvent systems, Catalyst and specialty synthesis
13674-84-5
99.5%
Polyurethane foam flame retardancy, Coatings and adhesive flame retardancy, Polymer formulation
839-90-7
98%
Flame-retardant polyester and resin synthesis, Wire-enamel and coating resins, Crosslinking systems
1330-20-7
Mixed-isomer industrial and solvent grades; total xylenes plus ethylbenzene by agreed specification; water, sulfur, distillation range and color by grade
Provide Solvency, Carrying & Spreading · Build Industrial & Protective Coatings — Industrial and protective coatings, Inks, adhesives and resin dilution, Rubber and polymer processing
14024-63-6
99%
PVC heat stabilization, Catalyst and crosslinking systems, Coatings and polymer processing
1314-13-2
Food / nutrition / feed grade; zinc, particle size and heavy-metal specification by quotation
Acidify Feed & Carry Nutrients · Supply Minerals & Trace Elements — Zinc supplementation, Trace-mineral premixes, Livestock and pet-food nutrition
Safety note
Confirm technical and safety data before ordering
Website information supports initial product discovery. Final specifications, hazard classification, transport conditions and storage requirements must be confirmed by the latest grade-specific SDS, COA and destination-market regulations.